Troubleshooting

This troubleshooting guide is only meant to assist, with a goal of possibly saving you a service call or at least knowing what may be the problem. We are not responsible for any damages to your heating or cooling equipment. Never attempt to do something you do not feel comfortable performing, that's what we are here for. Call us at (920) 734-1436 or email [email protected] for assistance.

Problem

The "change UV light" is blinking and chirping.

Possible Cause:

On the UVPhotoMAX the system treats all bulbs as 1 year bulbs. Those bulbs work fine for 2 years, and technically will continue past that but not at an optimal efficiency. If you only had the bulb in for one year you can reset it without replacing the bulb. On the bottom of the unit you'll see a recessed in reset switch. Use some plastic to reach in and press the reset button. You may have to hold it in for 10-15 seconds. That will reset it. If the bulb is 2 years old or more, stop in and pick up a replacement bulb, or on your next tune-up have us replace it for you.

Go Back